Buy Steroids Forum

Go Back   Buy Steroids Forum > Steroid > Home Steroid Chemistry

Making tablets

Home Steroid Chemistry Discuss Making tablets in the Steroid forums; I have 100g of oxymetholone, I wan to find out how to make tablets, do I need to mix something ...

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-31-2010, 04:42 PM
Junior Member
 
Join Date: Jul 2010
Posts: 11
Height: 186cm | Weight: 275lbs |
Thanks: 0
Thanked 0 Times in 0 Posts
Default Making tablets

I have 100g of oxymetholone, I wan to find out how to make tablets, do I need to mix something with powder? And the only way is to press powder into tabletes or there is an options?

Reply With Quote
  #2  
Old 07-31-2010, 05:41 PM
WetWorks's Avatar
Moderator
 
Join Date: Apr 2009
Posts: 9,600
Height: 5' 6" | Weight: 205lbs | Body fat: 17%
VIP Shouts: 1
Thanks: 6
Thanked 488 Times in 450 Posts
Default

best way is to make them into liquid orals. I'm sure there is a recipe on the site. the other option is to do capsule.
Reply With Quote
  #3  
Old 07-31-2010, 07:08 PM
Junior Member
 
Join Date: Jul 2010
Posts: 11
Height: 186cm | Weight: 275lbs |
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Will to capsule go just Oxy powder? How to make a gel? Even link will help a lot. Nobody making compressed tab's?
Reply With Quote
  #4  
Old 07-31-2010, 09:35 PM
WetWorks's Avatar
Moderator
 
Join Date: Apr 2009
Posts: 9,600
Height: 5' 6" | Weight: 205lbs | Body fat: 17%
VIP Shouts: 1
Thanks: 6
Thanked 488 Times in 450 Posts
Default

Lozgod's Liquid Oral Recipes

--------------------------------------------------------------------------------

Homebrew sure is fun if you ask me. I remember my first conversion. It was Nolvadex 20mg/ml. It was clear as water in 190 proof grain alcohol after some heat. Then two days later it crashed and I felt so let down. I followed the formulas out there and it wasn't working out. So I dug deeper and learned about PEG's and molecular weights and the such. I have made almost every conversion their is in the homebrew realm and would like to share my liquid oral recipes with the anabolic world.

For each hormone I listed ingredients needed. For the procedure scroll down.

*PEG300 can be substituted for PEG400.

Anadrol:
Highest concentration made - 50mg/ml
Per 1 gram of Oxymetholone you will need:
18.9 ml's of PEG 300

Anavar:
Highest concentration made - 20mg/ml
Per 1 gram of Oxandrolone powder you will need:
9.8 ml's of PEG 300
39.2 ml's of 190 Proof Grain Alcohol
or
49ml's PEG400 or PEG300

Armidex:
Highest concentration made - 5mg/ml
Per 1 gram of Anastrozole powder you will need:
19.9 ml's PEG 300
179.1 ml's of 190 Proof Grain Alcohol

Clomid:
Highest concentration made - 50mg/ml
Per 1 gram of Clomiphene Citrate you will need:
11.3 ml's of 190 Proof Alcohol
7.6 ml's of Glycerol

Dianabol:
Highest concentration made - 50mg/ml
Per 1 gram of Methandrostenolone powder you will need:
19 ml's of 151 or higher Proof Alcohol
No PEG needed. Follow the no PEG recipe.

Femara:
Highest concentration made - 5mg/ml
Per 1 gram of Letrozole powder you will need:
19.9 ml's PEG 300
179.1 ml's of 190 Proof Grain Alcohol

Nolvadex:
Highest concentration made - 20mg/ml
Per 1 gram of Tamoxifen Citrate you will need:
29.4 ml's of 190 Proof Alcohol
19.6 ml's of Glycerol

Proviron:
Highest concentration made - 50mg/ml
Per 1 gram of Mesterolone you will need:
18.9 ml's of PEG 300

Winstrol:
Highest concentration made - 25 mg/ml
Per 1 gram of Stanzolol you will need:
39 ml's of PEG 300



---------------------------------------------------------------------------------

Solutions requiring PEG or PEG and 190 Proof Alcohol

Step 1. Prepare a hot water bath. Boil water in microwave or on a pot. Once boiling starts remove from heat.

Step 2. Place PEG and powder in beaker.

Step 3. Place the beaker deep enough in to the water so that the hot water is level with the PEG and powder. Gently swirl or stir with a stir rod until solution is clear. Reheat water as needed.

Step 4. Allow PEG to cool some. Then add in your 190 proof alcohol. You don't have to do this drop by drop but don't just dump it in. Pour it in slowly.

Step 5. Stir or gently shake until mixed.




For recipes that do not require PEG.

1. Mix powder and 190 proof alcohol.

2. Stir with stir rod or shake. Most powders that do not require PEG will disolve no problem. If heat is needed follow the instructions for heating powders that use PEG.
Reply With Quote
  #5  
Old 08-01-2010, 03:56 AM
Junior Member
 
Join Date: Jul 2010
Posts: 11
Height: 186cm | Weight: 275lbs |
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Wow. Thanks, buddy. Now just need to find oud where I can buy PEG300 or 400. Wery eswful post
Reply With Quote
  #6  
Old 08-06-2010, 02:49 AM
Junior Member
 
Join Date: Aug 2010
Posts: 15
Height: 5.4 | Weight: 73lbs | Body fat: 22%
Thanks: 0
Thanked 0 Times in 0 Posts
Default Re:

LOL... no don't use the solution! Just use the propylene glycol... it's heavy enough. But just 10 or 20 percent... the rest should be grain alcohol and the femara
Reply With Quote
  #7  
Old 08-06-2010, 10:51 AM
VIP MEMBER
 
Join Date: Aug 2010
Location: USA
Posts: 72
Height: 5'4" | Weight: 178lbs | Body fat: 18%
Thanks: 0
Thanked 0 Times in 0 Posts
Default

As far as tablets are concerned, it all depends on where you live. It's illegal to own a pill press in the US and in some countries. That's why the capsule machine is more common.
Reply With Quote
  #8  
Old 08-06-2010, 01:10 PM
Junior Member
 
Join Date: Jul 2010
Posts: 11
Height: 186cm | Weight: 275lbs |
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by chickpwrlftr View Post
As far as tablets are concerned, it all depends on where you live. It's illegal to own a pill press in the US and in some countries. That's why the capsule machine is more common.
I got the capsule machine already and made 200tabs of Oxymetholone. I mix it with glucose, to make it easier to fill a cap machine.
Reply With Quote
  #9  
Old 08-06-2010, 07:28 PM
boknows21075's Avatar
VIP MEMBER
 
Join Date: Feb 2010
Location: stl mo
Posts: 371
Height: 6'6 | Weight: 240lbs | Body fat: 20%
VIP Shouts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via ICQ to boknows21075
Default

good post ww. And bump on the caps over press. I know of guys that flew under the radar for years then drew 'undue attention' when they ordered a pill press online.
Reply With Quote
  #10  
Old 08-07-2010, 04:47 AM
Junior Member
 
Join Date: Jul 2010
Posts: 11
Height: 186cm | Weight: 275lbs |
Thanks: 0
Thanked 0 Times in 0 Posts
Default

So it's better to stay with capsules. Works same and much cheaper.
Reply With Quote
  #11  
Old 11-29-2010, 06:05 PM
VIP MEMBER
 
Join Date: Nov 2010
Posts: 23
VIP Shouts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
Default

im a bit lost here did i miss somthing lol

u lot in america cant really do tabs cause there highly illigal! but caps are not to bad and cheaper? im in uk so im thinking both is shit but hey lol

yh so WW has posted liquid forms and oral?? how do u administer this as i personally not seen this before!

so then how did we go from liquid to caps? and cause im in uk its okay to press away lol so is there anything i need to do that other than a press?
Reply With Quote
  #12  
Old 01-21-2011, 09:58 AM
VIP MEMBER
 
Join Date: Nov 2010
Posts: 23
VIP Shouts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
Default

hey guys forget my last post think i was all night reading and tired lol!

so as for the initial quesion to make the oxy tabs or caaps is it just the raw pwder?? if so great times lol
Reply With Quote
  #13  
Old 01-21-2011, 10:26 AM
WetWorks's Avatar
Moderator
 
Join Date: Apr 2009
Posts: 9,600
Height: 5' 6" | Weight: 205lbs | Body fat: 17%
VIP Shouts: 1
Thanks: 6
Thanked 488 Times in 450 Posts
Default

Quote:
Originally Posted by hammeredbythor View Post
hey guys forget my last post think i was all night reading and tired lol!

so as for the initial quesion to make the oxy tabs or caaps is it just the raw pwder?? if so great times lol
caps are a pain in the ass to make. liquid orals are easier to make and use IMHO.
Reply With Quote
  #14  
Old 01-21-2011, 01:36 PM
yohimbe's Avatar
VIP MEMBER
 
Join Date: May 2009
Posts: 1,261
Height: 5'11 | Weight: 185lbs | Body fat: 12%
VIP Shouts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by WetWorks View Post
caps are a pain in the ass to make. liquid orals are easier to make and use IMHO.
Only certain ones are a bitch to suspend-winny is a bastard.
I got a capping machine just because of winny, but havent tried it yet. Otherwise liquid orals are the way to go. I just use 160 proof alcohol and with the exception of winny, never had a problem with suspending
Reply With Quote
  #15  
Old 01-21-2011, 03:08 PM
yohimbe's Avatar
VIP MEMBER
 
Join Date: May 2009
Posts: 1,261
Height: 5'11 | Weight: 185lbs | Body fat: 12%
VIP Shouts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by WetWorks View Post
caps are a pain in the ass to make. liquid orals are easier to make and use IMHO.
Only certain ones are a bitch to suspend-winny is a bastard.
I got a capping machine just because of winny, but havent tried it yet. Otherwise liquid orals are the way to go. I just use 160 proof alcohol and with the exception of winny, never had a problem with suspending
Reply With Quote
  #16  
Old 01-22-2011, 05:11 PM
VIP MEMBER
 
Join Date: Nov 2010
Posts: 23
VIP Shouts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
Default

as much as u are right that liquid is easier my friends wont want a liquid db or oxy lol so i just gonna have to do it the hard way watever way that is i dont mind caping or pressing just i need to know how to do it if u know would be a great help thanks
Reply With Quote
  #17  
Old 11-06-2012, 10:33 PM
VIP MEMBER
 
Join Date: Oct 2012
Posts: 1
VIP Shouts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Ok so here is the easiest way to do your capping in my opinion using gel caps. You will need a manual capping machine and #4 gel caps. I suggest buying the pre separated ones because they are a real pain in the ass to separate.
1) take 10 grams of raw powder
2) take 70 grams of baking soda
3) mix together (i use a food processor but you can shake in a ziplock container until mixed)
Its that simple and with that ratio you will make yourself some 25mg orals. If you want to make it 50mg use a 3.5/1 ratio and so on
Reply With Quote
  #18  
Old 11-07-2012, 10:28 AM
VIP MEMBER
 
Join Date: Feb 2009
Location: Canada
Posts: 1,538
Height: 5 11 | Weight: 180lbs | Body fat: 12??%
VIP Shouts: 11
Thanks: 31
Thanked 81 Times in 74 Posts
Default

If you are making small batches for personal use like me, here is what I do.
I got a micro measuring spoon and use it to fill the caps. The one I got says that it holds 10-15mg per scoop depending on the powder. I tested and measured it for the powders I am using and they all came up to 10mg per scoop. I fill the cap with the desired dose and close it, it's that simple. It might not be as fast as other methods, but it is by far the most accurate since you don't have to worry about properly dispersing the active ingredient in the filler.
Reply With Quote
  #19  
Old 06-12-2013, 02:19 PM
VIP MEMBER
 
Join Date: Jul 2011
Posts: 64
Height: 5 9 | Weight: 230lbs |
VIP Shouts: 3
Thanks: 2
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by Supaman View Post
If you are making small batches for personal use like me, here is what I do.
I got a micro measuring spoon and use it to fill the caps. The one I got says that it holds 10-15mg per scoop depending on the powder. I tested and measured it for the powders I am using and they all came up to 10mg per scoop. I fill the cap with the desired dose and close it, it's that simple. It might not be as fast as other methods, but it is by far the most accurate since you don't have to worry about properly dispersing the active ingredient in the filler.
I bought me a capsule machine too. But havent used it yet because i still havent found a post on how to make my orals. How do you know what the doses are? And is it just raw powder or is there sumthing else u need to add?
Reply With Quote
  #20  
Old 06-13-2013, 10:34 AM
VIP MEMBER
 
Join Date: Feb 2009
Location: Canada
Posts: 1,538
Height: 5 11 | Weight: 180lbs | Body fat: 12??%
VIP Shouts: 11
Thanks: 31
Thanked 81 Times in 74 Posts
Default

Quote:
Originally Posted by Poipounder View Post
I bought me a capsule machine too. But havent used it yet because i still havent found a post on how to make my orals. How do you know what the doses are? And is it just raw powder or is there sumthing else u need to add?
Search for basskiller on google and go to his website. He has a step by step guide explaining how to cap powder.
Reply With Quote
The Following User Says Thank You to Supaman For This Useful Post:
Poipounder (06-13-2013)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 02:40 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.