BB.... who does who dosent

[megaman85]

hey guys, ive been reading where some people use no BB in their brews of slower esters such as test enan, test cyp, eq. I always have used BB in all my brews, i was just wondering who, if anyone that home brews, does not use any bb in their slow acting compounds???

[yohimbe]

I've only home brewed short esters, but always use 20% BB.
I'm sure WW does EQ without BB, but its liquid at room temp so doesn't really need any help with suspension

[WetWorks]

I use very little to none BB, depending on the slower ester AAS

[^mR.]

Always used 20% my self. I think i might try and lower it next time i make some deca.

[megaman85]

ok what would you guys use on test e, test cyp, eq, and deca?? Ive always used 15% in all my brews as long as ive been in the game, but i see some people not using bb. Im a firm believer in sticking to what has worked for me well in the past, but, if the bb does not need to be in there, that would be one less thing i do not have to use in the brew.

[DBOY]

i forget doesnt the bb help carry depot away from injection site.......

[megaman85]

yes thats why ive always added it in my mixes

[^mR.]

I maybe just a little stupid but why change something if you dont need to. If you try with low BB you do run the risk of it crashing.

[cookiedough]

I'm not much help to you b/c I've never brewed long esters. I have brewed mast w/ only 5% BB and Test Prop w/only 15%. B-Real, WW, MWC and Diesel should have some insights for you here?

[Gman]

Mega, You should be able to get by with using just 15% bb for all you listed at 250-300mg/ml the strength determines the ratio the high concentrations will need a higher bb to suspend the powder/crystals. If you don't get the ratio correct or it's way too high to begin with it will "crash". To fix dilute with oil to lower doseage or up the bb but remember bb is harmful to liver and kidneys so keep the ratio as low as possible. I personally never go above 15% if it don't suspend there I made the mix too high mg/ml... makes sense?

[megaman85]

makes sense bro, i was wanting to use a lesser % bb if at all possible. Im going to experiment and see how it goes. Ill keep results posted.

[prime]

What's the thinnest oil you can find that holds well. Some gear I see is more fluid than my HG gear. LIke CSO seems thicker than GSO, etc. Is there any thinner than GSO? I also notice that a 250mg brew is thicker than a 200mg brew so the hormone it self adds viscosity.

[megaman85]

i use all gso. Im not sure on the viscosity, good question though. I have a lot to brew so ill keep you posted on the results. I just brewed some eq at 200mg using 3% ba and 10% bb. Some oils are definately more thin than others. Ive found all my pharm grade oils such as Schering amps are thicker than other gear.

[prime]

Okay. I'm just wondering if an oil seems very thin if there is less hormone in it if you get my drift. So am wondering if some labs use a thinner oil. Because I can definitely tell once hormone is added that the oil is more viscous. Maybe I'm being paranoid about premade stuff.

[WetWorks]

my guess is the thinner the oil or gear it was cut with something to make it runny.

[megaman85]

Eq brewed at 200mg/mL using 3% ba and 10% bb. Looks great, suspended easily and has stayed perfect.
photo-14.jpg

[^mR.]

supprised you need any BB when brewing as EQ is liwuid at room Temp

[WetWorks]

Originally Posted by ^mR.

supprised you need any BB when brewing as EQ is liwuid at room Temp

he doesn't, Mega just likes the sting of BB

[prime]

Originally Posted by megaman85

Eq brewed at 200mg/mL using 3% ba and 10% bb. Looks great, suspended easily and has stayed perfect.
Attachment 1778

Do you just pour it right into the vials?

[megaman85]

well when i asked the question of what everyone used, it seemed to me no one had a real solid answer, so i just went with a lose dose of BB. Everyone seemed to think 15% would be a good number, but went with 10%.... I only used the bb in the eq as a precautionary, ive also received deca and it was liquid at room temp. also so better safe than sorry.

Na dont pour into vials, i use a syringe and extract from beaker and insert into bottles.

[WetWorks]

Originally Posted by prime

Do you just pour it right into the vials?

I use a small funnel and let the EQ vial sit upside down to get the EQ out.

[WetWorks]

Originally Posted by megaman85

well when i asked the question of what everyone used, it seemed to me no one had a real solid answer, so i just went with a lose dose of BB. Everyone seemed to think 15% would be a good number, but went with 10%.... I only used the bb in the eq as a precautionary, ive also received deca and it was liquid at room temp. also so better safe than sorry.

Na dont pour into vials, i use a syringe and extract from beaker and insert into bottles.

15% BB is for like Prop and other fast acting AAS. 3% would be more like it for the slower acting AAS. think of the ester and you should know what to add to get it right.

[^mR.]

Originally Posted by prime

Do you just pour it right into the vials?

i poor straight into the vial. i think the less equipment that the compound touches the less chance of something going wrong. i used to use syringes. But i remember brewing some prop and i had little black floaty things in it. I put it down to the plunger in the syringe.

[sideshow1701]

Dboy is right about the bb carrying away the ester

But i had to use Peg 400 instead of bb it worked fine, Prop ,Tren

[megaman85]

yes bb does carry the ester, but is harmful in high amounts. You have to realize that when you are on lets say 1000mg of test, 600eq, or whatever your cycle might be, just think of how much BB is going into your body. Yes 15% does not sound like a lot, but when you figure how much amount of bb per week is in your system the number begins to get a little scary when you figure in all your compounds you are cycling and their bb%'s, thats why i wanted to suspend my long estered compounds at the lowest amount i could safely get away with.