Filtered Oils

[Banana]

Could you use previously filtered oils to cut down on the amount of filtering you need to do?

Say, by mixing the BA and BB with the powder and a small amount of oil, (not sure how much, say 3cc) and filtering that solution into the larger amount of previously filtered oil?

[b-real]

Originally Posted by Banana

Could you use previously filtered oils to cut down on the amount of filtering you need to do?

Say, by mixing the BA and BB with the powder and a small amount of oil, (not sure how much, say 3cc) and filtering that solution into the larger amount of previously filtered oil?

Thats not a bad idea. I dont see anything wrong with that as long as you're confident the previously filtered oil is still clean. I would still bake after its all done though.

[davidbl769]

Originally Posted by b-real

Thats not a bad idea. I dont see anything wrong with that as long as you're confident the previously filtered oil is still clean. I would still bake after its all done though.

i've done it. had no problems! listen to b. youshould bake after.

[signal22]

Sounds fine to me. You may have a hard time getting some powders to disolve with very little solution/oil...

[badstone]

Originally Posted by signal22

Sounds fine to me. You may have a hard time getting some powders to disolve with very little solution/oil...

I feel the same. Sometimes its hard to get them to dissolve. When I have a hard time I like to hold the solution in a bowl of hot water in a beaker, and swirl around.