step by step homebrewing

[b-real]

Found this on another forum, thought it might be useful for those interested..

First thing you will need is the hormone powder. This is actually the steroid in powder form. This is available on the black market both domestically and internationally. I suggest you try and find a source from China.


You will need the following:

digital scale that reads down to .1 gram (usually around 50.00)

beakers, size will depend on how much your going to make, they come in 50, 100, 250, 500, 1000 etc.

sealed, sterile vials large enough to hold what your going to make and then smaller ones to break down your gear so you are not drawing out of the same vial a million times.

syringe cases with out the needle in 30cc, 10cc and of course 3cc

18 gauge needles and 25 gauge needles. You will also need whatever you are going to shoot with like 22 or 23 gauge 1 or 1 1/2"

glass stir rod

whatman or millex filters in .45um. .22um can be used but makes filtering oil very time consuming, they are actually made for filtering water based products.

Benzyl alcohol- this is used to steralize the gear. Years ago people baked thier gear after brewing it. This is not needed as filtering and BA completly steralize the gear.

Benzyl benzonate- this is used to help suspend he hormone and makes the brew thinner and eaiser to shoot.

USP sterile oil, cottonseed, grapeseed etc., is fine

ok, lets make some gear.

lets make test enathate at 250mg/ml

for those that do not know a cc is the same as ml

so every cc drawn into the syringe has 250milligrams of steroid

ok, to figure out how much of everthing we need, we need to use a powder calculator

http://absinth.greatnow.com/calcpowder2.html

so we want to make 100ml's at 250mg/ml

we plug in the number

100 for oil ml's
250 for dosage
leave powder weight at .75 (can be used for almost all powders)

ba content we set at .02, which is 2%. theres alot of theories about the percentages of BA and BB, I like 2/20%, the more BA the more chance of painful injections.

bb content at .20 or 20%

we come up with the following:

59.25 ml's of oil
25 grams of powder
2 ml's of BA
20 ml's of BB

ok, so we take our beaker and stir rod and clean them with some BA or everclear and let them dry.

put on some latex gloves

get a frying pan and place about an inch or two of water in it and place it on the stove. Set the heat on low, this does not need to come to a boil. It should be hot enough that it is hard to keep your hand in the water.

take you beaker and place it on your scale and hit zero or tare. This will set your scale back to zero with the beaker on it. Now start putting powder in the beaker until it reads 25 grams. Make sure it is set on grams and not ounces, LOL.

now draw up the BA and BB into a syringe and spray it on the powder. It will look like there is not enough liquid to put the powder into solution, but there is.

now take the beaker and place it in the middle of the frying pan. Stir the solution every few minutes until it is clear.

now draw up 3 cc's of oil and place it aside. Take the rest of the oil and place it in the beaker. Once again, stir the solution every few minuntes until it is perfectly clear. We are not using the heat to steralize, just to help suspend the hormone and make the oil easier to draw up and filter, hotter oil is thinner oil.

now take a 25 gauge needle and stick it through the top of a 100-150ml vial at an angle. This is just used as a vent.

now take a 18 gauge needle and place it on a filter, it will go on the side that is smooth. The needle will not come off as this is the low pressure side.

now stick the needle through the top of the sterile vial

take a 30cc syringe and attach an 18g needle to it and stir your sloution and draw up 30cc's. Turn the syringe upright and pull back a little bit. Cap the needle and screw it off. Now carfully attach the full syringe to the top of the filter, this will screw in place. This is called a luer lock.

Now slowly push the plunger down, you want drops not a stream. This will take a while, so be patient. Once you are done, unscrew from the filter, re-attach the needle and draw some more solution and repeat until everything is in the vial.

now take the 3ccs of oil you put aside and run that through the filter to purge any remaining hormone.

you now have 100ml's of homemade test enathate. Now take a fresh 18g needle and draw up 20-30cc's at a time and put that into sterile sealed vials, that way your not drawing out of the same vial for months.

there you go, pretty easy. You should let the steroid sit for 24-48 hours to let the BA work before injecting.

some hormones are more difficult than other to get into solution, so if you have individual quesions please feel free to ask.

this process works very well for most test esters, EQ, tren etc.

There you have it, for the price of a cycle bought at your gym, you can buy all the equipment needed and enough powder for 5-10 cycles. Good luck

This is for entertainment purposes only, as this site does not condone the use of ANY illegal drug.

[Action]

Good info...I just wish I had the patience and discipline to mix my own shit...

[puremassbaby]

Action its not that hard you should try it

[signal22]

That's a good blueprint for making all injectables.

I will say one thing though - always use a .22um filter for your gear cause a bacteria called "pseudomonas diminuta" can penetrate a .45um filter

[b-real]

Originally Posted by signal22

That's a good blueprint for making all injectables.

I will say one thing though - always use a .22um filter for your gear cause a bacteria called "pseudomonas diminuta" can penetrate a .45um filter

Thats good to know but wouldnt the BA take care of it... or is resistant to BA?

[signal22]

Originally Posted by b-real

Thats good to know but wouldnt the BA take care of it... or is resistant to BA?

Yer BA will take care of it, so will baking - personally though I would like to filter as much bacteria out of my gear before letting the BA work on it & baking it.

If your going to filter it anyway might as well use a .22um. Here's the link - http://www.pall.com/34445_3813.asp

[b-real]

Originally Posted by signal22

Yer BA will take care of it, so will baking - personally though I would like to filter as much bacteria out of my gear before letting the BA work on it & baking it.

If your going to filter it anyway might as well use a .22um. Here's the link - http://www.pall.com/34445_3813.asp

Yeah makes sense... Do you bake it after the BA has done its work or do you bake it right away? I read somewhere that BA has a pretty low boiling point and once that is reached it would diminish its effects.

[signal22]

Yer BA boils at 205F, your never gonna boil off a significante amount but I still let the gear sit a few days before baking.

[b-real]

Originally Posted by signal22

Yer BA boils at 205F, your never gonna boil off a significante amount but I still let the gear sit a few days before baking.

Cool, cool thanx sig. As soon as my BB arrives I think Im ready to pop my homebrw cherry... Il post some pics..

[richieman316]

Where do you get new empty sterile vials at?

[maxgtl]

http://www.researchsupply.net/

[richieman316]

Thanks bro

[98stratocaster]

when solution is in the pan does the open beaker (air) effect the hormone or androgen solution?

when baking in a pre-sealed vial; just use regular oven?...will it melt the lids rubber stopper and metal ring? are the absolute things to beware of? I am just starting to look into home brewing..

appreciate this thread; very good info

[b-real]

Originally Posted by 98stratocaster

when solution is in the pan does the open beaker (air) effect the hormone or androgen solution?

when baking in a pre-sealed vial; just use regular oven?...will it melt the lids rubber stopper and metal ring? are the absolute things to beware of? I am just starting to look into home brewing..

appreciate this thread; very good info

No the air doesnt effect it and no the rubber wont melt. Good luck

[98stratocaster]

how long do you bake the vial?

THANKYOU

[b-real]

Its cool. 20-30 min. Dont forget to vent

[Dead23]

So you have to definately bake 48 hours after you have made your mixture. It just didn't say that at the top that's all, and then everyone suddenly started talking about baking.

I'm also having a hard time understanding the calculations. Why do you type in 100ml of oil for it to change to 59.25. Sorry if this sounds like a stupid question but I just can't wrap my head around it. I like to understand things completely.

[Eureka]

Originally Posted by Dead23

So you have to definately bake 48 hours after you have made your mixture. It just didn't say that at the top that's all, and then everyone suddenly started talking about baking.

I'm also having a hard time understanding the calculations. Why do you type in 100ml of oil for it to change to 59.25. Sorry if this sounds like a stupid question but I just can't wrap my head around it. I like to understand things completely.

You type in the amount that you want to ultimatly end up with, then it will tell you how much to add at the bottom. The amount will obviously be less because it is deducting the BA & BB you will also be mixing in... Make sense?

[Dead23]

Okay starting to make a bit more sense... but, if 100ml is what you ultimately want to end up with then why wouldn't all of the numbers equal 100ml. The example below equals 106.25ml.

Also what is the ratio of liquid to steroid. How would you figure out how much to inject?

Sorry, really lost with the calculations.

[Under-Radar]

Originally Posted by Dead23

Okay starting to make a bit more sense... but, if 100ml is what you ultimately want to end up with then why wouldn't all of the numbers equal 100ml. The example below equals 106.25ml.

Also what is the ratio of liquid to steroid. How would you figure out how much to inject?

Sorry, really lost with the calculations.

you forgetting about the powder weight. that number adds in. go to the calculator and play with numbers. its pretty simple.

[Dead23]

Okay after hours of playing with numbers and figuring out a whole heap of other calculation crap I can finally say that if I needed to I could do the calculations without your provided calculator.

[b-real]

Originally Posted by Dead23

Okay after hours of playing with numbers and figuring out a whole heap of other calculation crap I can finally say that if I needed to I could do the calculations without your provided calculator.

lol but why would you?

[Under-Radar]

Originally Posted by Dead23

Okay after hours of playing with numbers and figuring out a whole heap of other calculation crap I can finally say that if I needed to I could do the calculations without your provided calculator.

good so can i. the cal is only for those who are not numerically smart. lol

[Eureka]

Originally Posted by Under-Radar

good so can i. the cal is only for those who are not numerically smart. lol

LIKE ME!! The student becomes master! lol..

[Dead23]

Originally Posted by b-real

lol but why would you?

Because if i know how to do it by myself I will actually understand why I'm doing what I'm doing which makes it less likely for mistakes and on top of that I don't need to rely on anything.

The less you rely on stuff the more in control you are.