step by step homebrewing

[Dead23]

So do you have to bake 48 hours after you've made your gear or not? It just didn't say to do that in b-real's post at the top that's all.

[b-real]

You dont have to but it allows the BA enough time to do its own sterilizing. Just another added precaution...

[swoldaddy]

has anyone used this list and the ones that mb has on his page . witch one is better the one that mb has for test-e doesent use the bb.

[b-real]

Originally Posted by swoldaddy

has anyone used this list and the ones that mb has on his page . witch one is better the one that mb has for test-e doesent use the bb.

He doesnt use bb because test e can suspend fairly easy. I would still use it just in case at %10 just to be sure your brew goes smoothly.

[SweatyApe]

wow doesnt look as hard as i thought... when i get state side i should try it out... save lots of money this way?

[swoldaddy]

how much can you run through each filter is it like 10 grams of powder whats the norm. i havent herd anything about this

[signal22]

Originally Posted by swoldaddy

how much can you run through each filter is it like 10 grams of powder whats the norm. i havent herd anything about this

It's ml no mg....... Never run more than 100ml through a filter.

[swoldaddy]

thanks signal for the info. i want to start my own soon

[qualitytech123]

The powder will take up some volume. It looks like the calculator doesn't allow for the volume taken up by the powder. If you have 40ml of oil/ba/bb blend and add powder, you will have more than 40ml of final product. ....am I confused?

[megaman85]

I used the powder weight which was set at .75 and used the 2/18 percent ba to bb ratio and all my final products came out exactly to the total ml they were supposed to. I started with the powder, added the ba and bb, stirred gently in a pan of warm water until it was suspended and clear, than added my oil. Not sure if that would make a difference, just a thought.

[megaman85]

Let me rephrase that, inside of a beaker in a pan with warm water....

[b-real]

Originally Posted by qualitytech123

The powder will take up some volume. It looks like the calculator doesn't allow for the volume taken up by the powder. If you have 40ml of oil/ba/bb blend and add powder, you will have more than 40ml of final product. ....am I confused?

Keep the powder weight set at.75 and it all works out.

[vfr750f]

Originally Posted by signal22

Yer BA boils at 205F, your never gonna boil off a significante amount but I still let the gear sit a few days before baking.

This is a very interesting thread for me. Thanks the valuale insight here
I have one question for piece of mind. You mentioned the BA has a degredation point of 205 drgrees. Also I read that too much BA will cause injection pain. Is it safe to summize that after letting my gear sit for 24-72 hours then baking @ 275 degrees will burn off the remaining BA or just the residual bacteria ? Everyone knows the if we could remove the pain would be heavenly. I am working on some test e, test p, and some eq.

Mj

[drewbolic]

hey wld like to try someones home gear next cycle,dont no if i have the patience to make it my self.right now im running asia pharma test-e and drols.So spring will be looking.
JUICINDREW@HUSHMAIL.COM

OF COURSE,THIS IS A HYPOTHETICAL SITUATION FOR ENTERTAINMENT PURPOSES ONLY.

[cookiedough]

Originally Posted by drewbolic

hey wld like to try someones home gear next cycle,dont no if i have the patience to make it my self.right now im running asia pharma test-e and drols.So spring will be looking.
JUICINDREW@HUSHMAIL.COM
OF COURSE,THIS IS A HYPOTHETICAL SITUATION FOR ENTERTAINMENT PURPOSES ONLY.

wow, you sound like a law enforcement officer. Maybe u should consider paying 4 a membership.

[crazedhate]

first post and asking for homebrew hook up. WOW

[cookiedough]

Originally Posted by crazedhate

first post and asking for homebrew hook up. WOW

Soo funny. Can't blame a cop for trying. Imagine if someone fell 4 this!

[crazedhate]

they'll never learn

[breakthrough]

From what I gather, it seems that after the solution is transfered from the beaker to the 100ml vial, it's a good idea to bake it in the oven. Maybe I missed it in this thread, but is 48 hours the time you wait before baking and at what temperature should you bake it (225 for 30 minutes?)? Also, should you use filtered or unfiltered oil being that you're just going to filter anyway? I think I am going to make 75ml total of EQ. I want to dose it high at 400mg/ml so to keep it on the thinner I'm thinking 3% BA and 20% BB. Thoughts? Thanks guys.

[megaman85]

If you want it thinner id look into using some EO in place of some of the oil buddy. Not scaring you away from making it 400mg, but its going to take a lot more solvent to keep it suspended at that high strength. I made some test cyp which suspends very easily, at 325 strength and it took almost 20% bb to keep it clear.

the bad thing with making the strength higher is they say it destroys the muscle tissue at where you are injecting at a much higher rate. That shot sits there a lot longer than what people thing before it dissipates into the body.

As far as the oil goes, ive always used unfiltered oil. I feel that the price difference is greatly more expensive for the already sterile oil, and like you said, you will be filtering the oil, adding solvents to it that kill bacteria, and also baking the oil once again assuring the finished product to be free of anything harmful. Ive always let my products sit for 48 hours, than bake them for 30 to 40 minutes at 225 degrees.

[breakthrough]

Originally Posted by megaman85

If you want it thinner id look into using some EO in place of some of the oil buddy. Not scaring you away from making it 400mg, but its going to take a lot more solvent to keep it suspended at that high strength. I made some test cyp which suspends very easily, at 325 strength and it took almost 20% bb to keep it clear.

the bad thing with making the strength higher is they say it destroys the muscle tissue at where you are injecting at a much higher rate. That shot sits there a lot longer than what people thing before it dissipates into the body.

As far as the oil goes, ive always used unfiltered oil. I feel that the price difference is greatly more expensive for the already sterile oil, and like you said, you will be filtering the oil, adding solvents to it that kill bacteria, and also baking the oil once again assuring the finished product to be free of anything harmful. Ive always let my products sit for 48 hours, than bake them for 30 to 40 minutes at 225 degrees.

Alright, then maybe I'll just stick to the traditional 200mg/ml. What % of BB would you use for that? I think WW said he doesn't use any for EQ but I want to keep it as thin as possible.

[megaman85]

i see people saying they dont use any bb in some of their brews. i always have because ive read that bb helps carry the hormone throughout the body and move it away from the inject site. Ive always used 15% bb in all my mixtures, some say thats high but ive never had any problems using that number. I use 3%ba in all of them also and i ran eq at 16 weeks using those numbers with not one post injection pain whatsoever.

[breakthrough]

Originally Posted by megaman85

i see people saying they dont use any bb in some of their brews. i always have because ive read that bb helps carry the hormone throughout the body and move it away from the inject site. Ive always used 15% bb in all my mixtures, some say thats high but ive never had any problems using that number. I use 3%ba in all of them also and i ran eq at 16 weeks using those numbers with not one post injection pain whatsoever.

Nice. I'll go with that then.

[beetlejuce]

So if you get a gram of raw powder, and in this calculation. You use .75grams of raw powder to start with then the oil and the ba and bb is how the weight get to 30 grams of powder????? Sorry I have read trhrough this 2 pg. thread like ten timz! Help!

[^mR.]

This might make it a bit more simple Beetlejuce
http://www.steroidworld.com/forums/v...jectables.html