boldenone suspension need help

[Supaman]

Originally Posted by cappybye

What are you talking about? treabol? ndd? Nobody has a clue what you mean bud.

Don't you know what ndd is?!

It's nandrolone dhenyl dropionate

[cappybye]

Originally Posted by Supaman

Don't you know what ndd is?!

It's nandrolone dhenyl dropionate

LMAO I suppose it would be

[ApC]

trenabol acetate, went good test prop went good nardrolone and winny messed up,

[ApC]

ok so boldenone no ester i was able to make it really good only problem is when im cleaning it with the Whatman Anotop Filters, 0.02 Micron it leaking out instead of going in the vial. i only use 60ml of that filter i had 4 ml left

so do i use a new Whatman Anotop Filters, 0.02 Micron
i also have Millipore Sterile PVDF 33mm Syringe Filters .22 and .45 but its for water bases
or a whole different filter need help???

this is how i made it

2.10g BNE
.03% BA
.2% BB
3 mL guaiacol (forgot the acutal # but it was higher than that)
10mL ethyl oleate (forgot the acutal # but it was higher than that)
this makes 20mL @ 100mg/mL

[^mR.]

mate use the .45 and u shouldn't have any problems..

[cappybye]

Originally Posted by ^mR.

mate use the .45 and u shouldn't have any problems..

Shouldn't is the key word here. The .45 does not filter out all bacteria and that is a fact. You probably pushed too hard/fast and busted the filter. The oil has to be hot when you filter it and you need to take your time. You will also have a hard time filtering 50ml through the same filter, you usually need a couple, they plug up fast.

But make no mistake about it, you might be fine most of the time with a .45um filter, but you aren't filtering the product 100%.

[cappybye]

Originally Posted by shan9210

this is how i made it

2.10g BNE
.03% BA
.2% BB
3 mL guaiacol (forgot the acutal # but it was higher than that)
10mL ethyl oleate (forgot the acutal # but it was higher than that)
this makes 20mL @ 100mg/mL

You made 20ml of gear with 10ml of EO? No oil? Brrrr! Up to you but I wouldn't inject that........

[ApC]

Originally Posted by cappybye

You made 20ml of gear with 10ml of EO? No oil? Brrrr! Up to you but I wouldn't inject that........

no sir a little higher number 12-15ml eo and 2-3ml gua cant remmber the actual number.

only guaiacol and ethyl oleate and it worked but kinda scared to try it because guaiacol fuck smells bad

i heated it up because it was takeing forever to filter but as soon as i press it started to come out i did the same thing for test prop it went good thou and no i did not press hard slow and gentle

there one more way to make this by bac water but have not tried that yet sir

i would like to stike to Whatman Anotop Filters, 0.02 Micron because it has a pre filter in it.

any way i throw it way will retry this shit again soon and also try makeing it bac and thank

btw cappy since u said i have no oil in it i dont think regualer .45 and .2 filters will work i think Millipore Sterile PVDF 33mm Syringe Filters .22 and .45 will work becasue they dont filter oils what do u think

[cappybye]

Originally Posted by shan9210

btw cappy since u said i have no oil in it i dont think regualer .45 and .2 filters will work i think Millipore Sterile PVDF 33mm Syringe Filters .22 and .45 will work becasue they dont filter oils what do u think

Those filters can still filter oil as far as I know. I can't see why not. Any filter should be able to filter oil, I did 30ml of oil through a fine Millipore filter.

[ApC]

Originally Posted by ^mR.

Testosterone Suspension 20ml @ 100mg/ml

Test Base powder – 2g
EO - 10mL
Guaiacol - 6mL
3%BA - 0.4 mL
20%BB - 2mL
( you could try and swop the EO for GSO (grape seed oil) Its all going to be trial and error im affraid)


Got this from Bitter hes an old brewer on here used to be around not sure now tho
apparently it very hard to get to suspend but i'm going to give it a go on my next order i hate waiting around for easters to kick in these days im all about 6 weekers get it in get it out fast

sorry mR. i didnt see this post of urs i will try this method soon i and i made a recipe my self. suspend it is not the problem its leeking from the filter is the problem well will find out soon

[ApC]

it fucked worked i made it 100mg/10ml yeah

2.50 gso
2.2 eo
2.2 gu
1.2 gram (if u go above for example instead of 1.2 or 2.2.... it will not work)
.30ba
2.0 bb

but when drawing it up in the syring (before filtering) make sure to use 18g or it will leak out all of it

[WetWorks]

Gratz!