Test Cyp and Sust both 250

[Jo0sh336]

Hey guys I have searched between 3 forums now and posted this on one other with no response yet after a few days. I would greatly appreciate some insight. Thanks in advance.

I am making Test Cyp 250mg/ml and Sustanon 250mg/ml.

Test Cypionate 250mg/ml
I have read a few arguments about test cyp being harder to suspend than test e. Some people have said 5%bb for every 50mg of cyp. However, I have also read other reviews on 2/20.

Has anyone ever had problems with a 1/20 or 2/20 solvent ratio for test cyp holding without recrystallizing? Have you gone with lower ratios successfully?


Sustanon 250mg/ml
I came across 2 ratios that I have heard worked 5/15 and 2/20. I would obviously like a lower concentration of solvent without jeopardizing the yield. Does anyone have a good concentration that has worked for them for sustanon?

Thanks

[neoconjerk]

Originally Posted by Jo0sh336

Hey guys I have searched between 3 forums now and posted this on one other with no response yet after a few days. I would greatly appreciate some insight. Thanks in advance.

I am making Test Cyp 250mg/ml and Sustanon 250mg/ml.

Test Cypionate 250mg/ml
I have read a few arguments about test cyp being harder to suspend than test e. Some people have said 5%bb for every 50mg of cyp. However, I have also read other reviews on 2/20.

Has anyone ever had problems with a 1/20 or 2/20 solvent ratio for test cyp holding without recrystallizing? Have you gone with lower ratios successfully?


Sustanon 250mg/ml
I came across 2 ratios that I have heard worked 5/15 and 2/20. I would obviously like a lower concentration of solvent without jeopardizing the yield. Does anyone have a good concentration that has worked for them for sustanon?

Thanks

I don't have any knowledge of this.

Can somebody help him out?

[prime]

i use 1/20 for 200mg strength with cyp. never had a problem.

[Jo0sh336]

With a lot of searching I came across this thread. Wetworks mentions using 5% BA only to suspend Test Cyp 250. However I would like to use BB from my research it shows to deliver the drug better.

Please help brewing!!!!!!!

[prime]

Originally Posted by Jo0sh336

With a lot of searching I came across this thread. Wetworks mentions using 5% BA only to suspend Test Cyp 250. However I would like to use BB from my research it shows to deliver the drug better.

Please help brewing!!!!!!!

using BA is personal. Some people really get irritation at the inj site if it's over 2 or 3%. Some don't. The good thing about making something stronger like at 250mg is that if it doesn't hold, you can heat it up and then add more oil, ba and bb to get it to the 200mg where it will hold for sure. So if 50ml batch doesn't hold at 250mg, then just convert it to a 62.5ml batch at 200mg. So probably will have to experiment a little to find the right recipe for you.

[Jo0sh336]

Well both batches ran at 2/20 for 250mg/ml and worked out great. Was very happy with final product.

In the future I will try a lower concentration.

[prime]

Originally Posted by Jo0sh336

Well both batches ran at 2/20 for 250mg/ml and worked out great. Was very happy with final product.

In the future I will try a lower concentration.

good to hear it held. keep an eye on it. It can fall out after a few weeks.

[Jo0sh336]

will do! thanks prime. So far its 1 week in and still clean looking