Need help again! Test crystalized -.-

[NEMSZ]

Hey guys, so I have 2 questions and I need some help..

#1: My Test C crystalized, how do I fix this?? I believe I used 3% BA and 15% BB.. If not then 18%BB I don't remember.

#2: I had my Test E already brewed and I waited about 2 weeks to get the filters, I had it sealed in sterile vials, I baked @ 200 degrees before filtering.. Now my question is when I poured th Test E in the filter I saw it like if wasn't suspended anymore.. Not sure if its normal? The oil was kind of swirly but once it settled it was fine, and before it was fine as well.. Now after filtering it still looks good but I wanted to know if maybe it was because of the heat??

Thanks for any help guys..

[joeracer01]

Test C is much harder to hold in suspension than Test E
You need to use a minimum of 20% BB with Test C @ 200mg/ml if you are @ 250 mg/ml it needs to be 25% BB. It’s 5% BB for every 50 mg/ml with Test C
Don’t add anymore BA you already used too much in my opinion. Or you can use EO while using less BB.

Don’t worry about the oil in water look right now. Let it sit a few days then swirl (not to make air bubbles just a swirl) it around and see if it still have an oil in water look. BTW that doesn’t mean its not suspended. Not suspended you will see crystals.

[NEMSZ]

Originally Posted by joeracer01

Test C is much harder to hold in suspension than Test E
You need to use a minimum of 20% BB with Test C @ 200mg/ml if you are @ 250 mg/ml it needs to be 25% BB. It’s 5% BB for every 50 mg/ml with Test C
Don’t add anymore BA you already used too much in my opinion. Or you can use EO while using less BB.

Don’t worry about the oil in water look right now. Let it sit a few days then swirl (not to make air bubbles just a swirl) it around and see if it still have an oil in water look. BTW that doesn’t mean its not suspended. Not suspended you will see crystals.

Ok so what you're saying is for every 100ML I should add about 7ml more of BB?? That will correct the problem?

And yea I'm filtering the Test E now. It looks good after sitting and being filtered so I guess everything is ok?

What is that water in oil look caused by anyway??

[bostonpaul]

I've had an experience where I thought my test-e was fine and after it sat a couple weeks I can see some chrystals..does this most likely mean I need more BB?

I am starting to wonder how sensitive my digital scale is..that perhaps there could be a quarter to a half gram too much powder for the recipe

What do you feel is the correct minimum safe ml of bb in a one hundren ml solution of test-e? And if in doubt of scale accuracy how much extra BB might be good to use?

Thanks

BP

[wikksmith]

In chemistry the steroids of crystallization of steroids we can are check with isolation of product by uses of steroid state that depend upon state of solid ,state of liquid and state of Ge's the solution constrained and diluted using in crystallization steroid which mate in the product and given some reviews of product and the chemistry had the two part organic and in-organic both term related with the solution what kind of solution you had to do practical if you want to get other help in chemistry practically and theoretically visit the link.thanxx

[cappybye]

Crashed gear is great for making steroid suppositories.

There awesome
I never inject aas these days - sups all the way!

Its also way easier, I just keep a heap of them in the fridge dosed 150mg test e and use 1 eod.



Herbal, Nuttritional Supplements - How to Make Suppositories

Originally Posted by NEMSZ

Hey guys, so I have 2 questions and I need some help..

#1: My Test C crystalized, how do I fix this?? I believe I used 3% BA and 15% BB.. If not then 18%BB I don't remember.

#2: I had my Test E already brewed and I waited about 2 weeks to get the filters, I had it sealed in sterile vials, I baked @ 200 degrees before filtering.. Now my question is when I poured th Test E in the filter I saw it like if wasn't suspended anymore.. Not sure if its normal? The oil was kind of swirly but once it settled it was fine, and before it was fine as well.. Now after filtering it still looks good but I wanted to know if maybe it was because of the heat??

Thanks for any help guys..

[prime]

Originally Posted by NEMSZ

Hey guys, so I have 2 questions and I need some help..

#1: My Test C crystalized, how do I fix this?? I believe I used 3% BA and 15% BB.. If not then 18%BB I don't remember.

#2: I had my Test E already brewed and I waited about 2 weeks to get the filters, I had it sealed in sterile vials, I baked @ 200 degrees before filtering.. Now my question is when I poured th Test E in the filter I saw it like if wasn't suspended anymore.. Not sure if its normal? The oil was kind of swirly but once it settled it was fine, and before it was fine as well.. Now after filtering it still looks good but I wanted to know if maybe it was because of the heat??

Thanks for any help guys..

How many mgs/ml did you make your test c at?