Little advise on my viagra experiment

[Smoove]

Sup,

Got myself a little viagra powder. I am having difficulty finding an exact recipe for mixing and capping this stuff. The basics appear to have me weigh out the gelcaps, protein powder (filler) and the viagra (suppliment) Do the math, then fill the caps.

Is this it? no other stuff to buy? Most of the directions I found is just capping instructions but not actual viagra specific...............any help bro's?

Thanx

[cappybye]

That's it, a piece of cake. Do a test run with the filler powder (I used BCAA since the weight is closer and it flows better) to see how much you need for a set of caps. Then dump it and weigh it out, multiply by the number of sets you want to make, subtract the weight of the viagra powder to make room for it, then mix the filler and drug together. Try and mix one big batch and mix it extremely well to get the dosing spot-on, it doesn't take much to miss your dosing since there is so little powder per cap. Then start filling caps and you're GTG.....

There should be no need to weigh the empty gelcaps......

[Smoove]

Originally Posted by cappybye

That's it, a piece of cake. Do a test run with the filler powder (I used BCAA since the weight is closer and it flows better) to see how much you need for a set of caps. Then dump it and weigh it out, multiply by the number of sets you want to make, subtract the weight of the viagra powder to make room for it, then mix the filler and drug together. Try and mix one big batch and mix it extremely well to get the dosing spot-on, it doesn't take much to miss your dosing since there is so little powder per cap. Then start filling caps and you're GTG.....

There should be no need to weigh the empty gelcaps......

Ok, thanks. I guess my last question would be how do I know the strength?
Say 50mg vs 100 mg. I want to make 50 mg

[cappybye]

If you're making 200 caps in one batch and want 50mg each then you will need to use 10000mg, or 10gr of powder. It's always a bit of a shot in the dark and you always end up with a few extra caps or a few less due to the powder weights. When you're done just divide the number of caps you made into the 10000g and that will give you your exact dosage.

Remember to mix, mix, mix!

[Smoove]

Originally Posted by cappybye

If you're making 200 caps in one batch and want 50mg each then you will need to use 10000mg, or 10gr of powder. It's always a bit of a shot in the dark and you always end up with a few extra caps or a few less due to the powder weights. When you're done just divide the number of caps you made into the 10000g and that will give you your exact dosage.

Remember to mix, mix, mix!

Thanx man

[twointheshirt]

I know your questions has already been anwsered figuered I would post up also.

I've always used the below method everytime, and have never ran into a issue.

When it comes to mixing the powder together I followed the geometric dilution method...

I've made 100mg caps of Viagra. Don't be worried about the caps being over dosed either. During human trials of viagra patients were given dosages of 300mg. I've done 250mg myself and had no adverse side effetcs for the stuffy nose and vision..

*COURTESY of BASSKILLER*

1. Load 24 empty caps into the capsule machine, then fill all 24 caps with Baking Soda (tamping powder if final caps will be tamped).

2. Empty all the Baking Soda out of the capsule machine and weigh it. Total weight = 17,160mg

3. Divide that weight (17,160mg) by the number of capsules (24) to get the total weight per cap. 17,160mg / 24 = 715mg a cap.

4. Repeat these steps with the Aspirin powder. Total weight = 11,760mg / 24 = 490mg a cap.

5. Now we need to figure out the ratio of Aspirin to Baking Soda.

100mg Aspirin = Unknown mg of Baking Soda

490mg Aspirin = 715mg Baking Soda

(100mg Aspirin x 715mg Baking Soda) / 490mg Aspirin = 146mg of Baking Soda (this is the Unknown mg of Baking Soda, and how much must be removed to make space for 100mg of Aspirin)

715mg Baking Soda - 146mg = 569mg Baking Soda (this is how much Baking Soda to use per cap)

569mg Baking Soda x 48 caps = 27,312mg Baking Soda

100mg Aspirin x 48 caps = 4800mg Aspirin

So to make 48 100mg Aspirin caps we need 4800mg of Aspirin powder and 27,312mg of Baking Soda.

[nemertemezt]

Originally Posted by Smoove

Sup,

Got myself a little viagra powder. I am having difficulty finding an exact recipe for mixing and capping this stuff. The basics appear to have me weigh out the gelcaps, protein powder (filler) and the viagra (suppliment) Do the math, then fill the caps.

Is this it? no other stuff to buy? Most of the directions I found is just capping instructions but not actual viagra specific...............any help bro's?

Thanx

It is interesting.. I've made capsulated viagra but the 100mg was not so potential...although the lab test said that it is pure sildenafil...

funny

[Smoove]

Well I made up 50 mg caps but I didn't tamp it the first time and I was using a very " fluffy" powder as my filler. I think it was creadrive or something, some sort of creatine powder. Anyway my first batch completely sucked so I started over only this time tamping it. HUGE change. Stopped up sinuses, flushed face and a hard on for 2 days!