Peg400

[^mR.]

Hey guys im looking at making some water based winny i know its one of the hardest to get right heres the reciepe that ill be using..

1) suspend you winny with PEG400, usually 3ml of PEG400 to every gram of powder.

2) once suspended run the mixture through a syringe filter.

3) Take 17ml of distilled water and add 2% BA to it or you can simply use Bac Water.

4) once you have your water along with 2% BA you must add a little surfactant (poly80)
just a few drops from the end of a needle - This is very important

5) next you must run the mixture through a syringe filter

6) The final step would be to then add the water into the PEG400. You must make sure that this is added in VERY slowly. When the water is added to the PEG it will bring the Winny powder out of the PEG solution. You will see your mixture begin to turn white in color.

After this is done you will have approx 20ml of water based winny at 50mg/ml

This is just some fast instructions here. You can heat the mixtures before running them through the filters, this will thin them and make you filtering job alot easier.


My question is... is PEG400 safe to inject ? The things that i have read says it is ?

[sideshow1701]

I used that formula my self

and peg 400 ,im not dead ,I think.

if you use the whatjunk filter your going to blow it out 100%.

it has to be HOT to filter .

One key factor is the size of the particulate winny the smaller it is the better

it filters ,grind it up finer.

For me the winny i did and the test suspension it kicks hard ,but a huge pain

to make..

NOTE if you decide to drink it after you make it ,grab your cat

and lick its ass to get the taste out of your mouth its HORRIBLE,the neighbors

dog still wont come around me

[^mR.]

Thanks Sideshow :P

did you get the winny suspend ok ? cant wait to try this out Would love to get some test suspension to but having trouble getting the powder

[sideshow1701]

winny was good the suspension got stuck in the needle all the time

Powders sorry to hear that wait a few months just my opinion.

Its not easy but those 2 mixed your going to get sever boost in strength.

[basskiller]

wouldn't peg 300 be better.. I always though you wanted to match the molcular weigh or atleast be as close??

[sideshow1701]

I dont know i know that there are different strengths of PEG