Buy Steroids Forum  

Go Back   Buy Steroids Forum > Steroid > Home Steroid Chemistry

How to Make Acetic Acid

Home Steroid Chemistry Discuss How to Make Acetic Acid in the Steroid forums; I've done quite a bit of searching on this board for instructions on how to make .06% Acetic Acid with ...

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 05-23-2011, 04:12 AM
VIP MEMBER
 
Join Date: May 2011
Location: Boston
Posts: 74
Height: 5'10" | Weight: 185lbs | Body fat: 13%
Default How to Make Acetic Acid

I've done quite a bit of searching on this board for instructions on how to make .06% Acetic Acid with no luck. I found these instructions on another board and thought it would be helpful for all of those that wanted to make it on your own. So, without further ado, here you go...

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
0.6% Acetic Acid Overview
Acetic Acid (AA) will be used to reconstitute (turn your lyophilized IGF-1 into a liquid form) your IGF-1. The standard is to use 0.6% AA. This concentration is typically not available for you to purchase. You can make your own 0.6% AA and I will show you how below (many have used this method successfully).

Making 0.6% Acetic Acid
You will have to purchase a few items upfront. Here is a grocery list of items you will need.

Items Needed:
Distilled white vinegar (grocery store)
Distilled water (grocery store)
0.2-0.22um sterile Whatman syringe filter
10mL syringe with a luer lock tip
~20-22 gauge needles (just the needles)
Sterile glass vial (10-20mL)
Alcohol prep pads ***8211; sterile kind (70% isopropyl alcohol)



Quick Guide:
1. Swab the top of your sterile vial with alcohol prep pad (70% isopropyl alcohol)
2. Mix 7.5mL distilled water with 1.0mL vinegar
3. Add Whatman syringe filter
4. Add sterile ~20ga. needle to end of Whatman filter
5. Inject the 8.5mL of solution into the sterile vial
6. You now have sterile 0.6% acetic acid



Detailed Directions:
1. Wash you hands thoroughly
2. Optional: wear alcohol treated exam gloves (rub your gloved hands together with 70% isopropyl alcohol on them until dry)
3. Using a sterile alcohol prep pad, swab the top of your sterile glass vial (into which the acetic acid solution will be held in)
4. Using the 10mL syringe with a ~20ga. needle on the end, draw up 7.5mL distilled water
5. Using the same syringe, now draw up 1mL vinegar
6. Remove needle from the syringe and discard
7. Attach 0.2-0.22um Whatman sterile syringe filter (do not touch the free end that will have a needle on it)
8. Put a new, sterile needle (~20 gauge) onto the free end of the Whatman filter (do not touch needle)
a. Do not use the same needle on the Whatman that was used to originally draw up the unsterile vinegar and distilled water.
9. Put a ~20 gauge sterile needle into the top of your sterile glass vial to act as a vent
10. Inject the acetic acid solution into the vial
11. You are now done and should have sterile 0.6% acetic acid

Notes:
1. These items MUST be sterile: 20-22ga. Needles, whatman filter, glass vial
2. Whatman filter: These small, sterile filters are used to filter the acetic acid solution so it is sterile. It does not matter that the liquid in your syringe (distilled water & vinegar) is not sterile, nor does it matter that the syringe itself is not sterile. Once the liquid goes through the filter it is STERILE. Thus, everything after the filter must be sterile!
3. You will most likely use 1mL (milliliter) of 0.6% AA to reconstitute your IGF-1. Thus, you should make at least 1.5mL. In reality, it's just as easy to make 8.5mL as I have stated in the above directions. You will have plenty for use later then.
4. Do NOT reuse the Whatman filter nor any needles! Discard immediately.

Last edited by Nick!!; 05-23-2011 at 04:29 AM.
Reply With Quote
  #2  
Old 05-23-2011, 05:18 AM
leigh's Avatar
Member
 
Join Date: Apr 2011
Location: Wales - UK
Posts: 49
Height: 3ft | Weight: 58lbs | Body fat: too much!%
Default

Interesting read, nice find.
Reply With Quote
  #3  
Old 05-23-2011, 09:47 AM
Mr.Nick's Avatar
VIP MEMBER
 
Join Date: Jun 2009
Posts: 879
Height: 5-10 | Weight: 190lbs | Body fat: 12%
VIP Shouts: 26
Default

Thanks a lot bro, I've been wondering about that. I'm gonna do an igf run when my cycle is over so that'll come in handy.
__________________
"The Iron never lies to you. You can walk outside and listen to all kinds of talk, get told that you're a god or a total bastard. The Iron will always kick you the real deal. The Iron is the great reference point, the all-knowing perspective giver. Always there like a beacon in the pitch black. I have found the Iron to be my greatest friend. It never freaks out on me, never runs. Friends may come and go. But two hundred pounds is always two hundred pounds." -Henry Rollins
Reply With Quote
  #4  
Old 05-23-2011, 09:50 AM
VIP MEMBER
 
Join Date: May 2011
Location: Boston
Posts: 74
Height: 5'10" | Weight: 185lbs | Body fat: 13%
Default

You're welcome guys. I found sources that had it available, but since I already make my own brews, I figured I might as well learn how to make this too LOL.
Reply With Quote
  #5  
Old 12-06-2011, 08:22 PM
Member
 
Join Date: May 2011
Posts: 38
Height: 5'8 | Weight: 226lbs | Body fat: 11%
Default

So I guess to make a bigger batch you could do 15mls sterile water to 2ml white vinegar and bam 17ml's aa

Sounds good
Reply With Quote
  #6  
Old 12-06-2011, 08:36 PM
Pack11's Avatar
VIP MEMBER
 
Join Date: Jan 2011
Location: North
Posts: 2,494
Height: 6' | Weight: 214lbs | Body fat: 13%
VIP Shouts: 1216
Default

Or if your lazy like me you can buy it from great white peptides
__________________
-- Welcome failure, with failure comes experience and wisdom. Add perseverance, and you get success. Without failure there is no success --
Reply With Quote
  #7  
Old 12-06-2011, 09:28 PM
Member
 
Join Date: May 2011
Posts: 38
Height: 5'8 | Weight: 226lbs | Body fat: 11%
Default

Quote:
Originally Posted by Pack11 View Post
Or if your lazy like me you can buy it from great white peptides
Lol good call
Reply With Quote
  #8  
Old 12-06-2011, 10:57 PM
Junior Member
 
Join Date: Dec 2011
Posts: 3
Height: 6'5 | Weight: 249lbs | Body fat: 13%
Default

Nice read man
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 11:38 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2012, vBulletin Solutions, Inc.