lump after injection

[husky2020]

hey fellas im having alittle problem ok i just got done brewing test e and deca and after injection i have a big lump on my tri and it hurts like a bitch and is very hard never happened before kinda freaking me out. i got my powders from MB if that helps first time getting from him, i filtered each 2 times and let it sit for aweek before using. if anyone has any idea of what this can be please help. thanks bros

[badstone]

What is your recipes? How much did you inject?

[husky2020]

Test Enanthate 10 gram conversion

Needed
10 grams test E
2ml Benzyl Alcohol = 5% BA
30.5 ml sesame oil
and i shot 2 mls

then deca was

10 grams powder
37.5 ml sesame oil
2.5ml BA 5%
7.5ml BB 5%
and shot 2 mls

[Replicator]

Originally Posted by husky2020

hey fellas im having alittle problem ok i just got done brewing test e and deca and after injection i have a big lump on my tri and it hurts like a bitch and is very hard never happened before kinda freaking me out. i got my powders from MB if that helps first time getting from him, i filtered each 2 times and let it sit for aweek before using. if anyone has any idea of what this can be please help. thanks bros

I reckon you better get some antibiotics mate ive had one of them in my arse before and it was infected.
Rep

[husky2020]

ya ima do that but y is the gear doing this. i made the gear exacly the way it says and i dubble filtered it and heated to 225 deg i never bought from MB before but they say his G2G.

[joeracer01]

Do you always use 5% BA? I never use more than 1%
You use a .2 or .4um filter?

You shot a total of 4ml’s into your tricep? If so that is a ton in that one site.

Is the site RED?
Is it hot or warm to the touch?
How long has it been this way?

How do you feel? Sick or high temperature?

[husky2020]

i shot 1 ml of deca and on ml of test in one tri and then the same in the other one im am using .02 filter. yes it is alittle red and is alittle warm to the touch but haven been sick and its been this way since wednesday.

[badstone]

It will go away. But it sounds like a reaction from BA or not cleaning your stuff good. You can get some antibiotics to help......

[joeracer01]

Yeah high BA I would guess.
I would use ibuprofen and ice it, 15mins on 15off
I wouldn’t use heat and wouldn’t massage it.

[husky2020]

thanks alot bros ya i have done th home brew one time before and never had this happen. but how can i make the gear so it doesent keep happening and what can i do so the gear i have wont do this again cause it gives inces to my arms but is not comfortable lol.

[joeracer01]

You can add more sesame seed oil (SSO) to your mix to cut it.
Your mg/ml ratio will also be cut down. So you will have to take more ml’s to get the same amount of test or deca into your system. I would filter the new oil into the bottle and re-bake.

Or you could just simply draw up 1ml of the test or deca and then draw up .5-1 ml of SSO to cut it. You will be putting a larger amount of oil into the site.

Looked at your list again and you only put 5% BB into your deca mix and didn’t list it in your test mix. BB helps the hormone distribute. With too little BB and the hormone could crystallize in depot which would cause extreme pain also. I use 20% BB in almost all my mixes. So with that said if I were you I would add more BB filtered and re-baked. Still this will cut your mg/ml. I have no idea what you mg/ml are as you didn’t list that.

[husky2020]

ya i did think to add more oil to the mix but dident want to cut down on mgs to ml ratio but the reason i dident add any bb to the test is cause the recipe dident have any in it witch i found weird but if i want to add it how would i do it if my mix is in 20 ml vials already?

[joeracer01]

Get more vials.
What is the strength of your stuff? mg per ml

[husky2020]

both r suposed to be 250mgs /ml i mean if i need to come up with a new ratio how would i do it cause all the gear is mix up and seperated and i have taken a few shots.

[joeracer01]

I'm assuming you made 40ml's of test right?

If so add 4ml's of BB to each 20ml vial of test and you will cut it from 250 to 200mg/ml
This will give you a 20% mix of BB in your test.

Something is wrong with your deca recipe.
You can’t have 5% BA = 2.5ml and 5% BB = 7.5ml

You need to list
Total volume wanted
Strength mg/ml
BA%
BB%
Then list
How much oil you used
How much powder
How much BA
How much BB

This way we can tell if you did it right by the numbers. Then we can tell you how to cut it and what it will become.

[husky2020]

i got the recipe from here i followed to the letter heres what i did

Test Enanthate 10 gram conversion

Needed
10 grams test E
2ml Benzyl Alcohol = 5% BA
30.5 ml sesame oil
Syringes 3cc & 5/10cc
18 or 20 gauge needles
mixing Vial
Sterile Vial
Whatman sterile filter

Deca for 10 grams

needed
10 grams powder
37.5 ml sesame oil
2.5ml BA 5%
7.5ml BB 5%
Syringes
Vial
Sterile Vial
Whatman sterile filter

[joeracer01]

TEST…. add 4ml's of BB to each 20ml vial of test and you will cut it from 250 to 200mg/ml
This will give you a 20% mix of BB in your test.


Your deca recipe is just wrong!!!
How much deca did you make? 50ml’s????

[husky2020]

yes 50 mls

[joeracer01]

This is what it should look like if you were doing
50ml @ 250mg/ml with 5% BA and BB
35.62 Oil
12.5g Powder
2.5ml BA
2.5ml BB

You stated both were @ 250mg/ml but what you did with the Deca is 200mg/ml NOT 250. What you posted is still wrong.

50ml @ 200mg/ml would be this with 5% BA and BB
37.5ml
10g powder
2.5ml BA
2.5ml BB

You stated you used 7.5ml of BB this would mean you used 15% NOT 5%
Also you should of only used 32.5ml of oil not 37.5ml. This means you don’t have 200mg/ml deca its actually weaker than 200, it more like 180mg/ml.

50ml @ 200mg/ml with 5% BA and 15% BB
32.5 oil
10g powder
2.5ml BA
7.5ml BB


So your deca is fine just weaker than you wanted and your test needs BB added to it and it too will be weaker.

Next time read and use a powder calculator to figure out the numbers for yourself. Don’t ever trust what some guy sent you. After you do that post up what you got here before you dive head first and have someone check your work. There is no shame in asking someone to check the numbers.

[husky2020]

thanks alot for all your help bro i really appreciate it. o i was going to ask you besides doing the grear how would you know if the powder is real cause even though i got from a relieable soures on here i still feel weiry after getting burned so many times you know.

[joeracer01]

Send it out for testing. Cost $ tho!

It’s tough you are at someone’s mercy in this deal.
Hope to find a good source one day and stick with them.
We were all here/there at some point. Good luck!

[sideshow1701]

Instead of filling in the missing variables

describe the powder

then describe how you made your product

and why in the tricep ,when inject should put it some place to keep a good eye on it,not the tricep.

dont make any more until the problem has been solved



and is this the first time making these items.

[husky2020]

yes first time make test e and deca but have made alot of tren ace and prop.

[prime]

Everyone should be able to calculate their powders on their own and use the powder calculator to double check there results. But 5% BA is way to much imo. Pharmacutical grade is about 1% BA with cyp.

Steroid Powder calculator

[sideshow1701]

tren ace and test prop are the easy,

as the old adage goes measure 3 times cut one time ,like in a machine shop,same goes for here to.

test e and deca raw look different ,so we can start from there.